Thanks for purchasing PLANET GSD-802S / GSD-802PS Gigabit Web-Smart Ethernet Switch.
This document provides the firmware release note and history of the product

===================================
Firmware Version: 1.3b(v1.3b0900901)
Hardware Version: 1
SDK Version: 2.34d
Firmeware File Name: 
   - FW-GSD802S_v1.3b090901.wrp 
   - FW-GSD802PS_v1.3b090901.wrp
Release at 2009/09/01 
===================================

This firmware provides the following modification:

A: Bug Fixed -
    (1) [RSTP] Fix RSTP incorrect issue caused by firmware version 1.2. 

    (2) [IGMP Snooping] : Fix discard IGMP packets which has checksum error on IP layer.

    (3) [IGMP Snooping] : Fix when the last IGMP member leave the group, the dynamic router port of this group will be removed.

    (4) [Power Saving]: Fix: Run receiver configuration if PerfectReach LinkUp savings is enabled

B. Function Added -
    N/A

===============================================================
Note: System will automatically restore to default once users update from old versions
===============================================================

[Upgrade Requirements]:

1. The latest firmware version of GSD-802S / GSD-802PS

2. The GSD-802S / GSD-802PS

3. Workstation with Microsoft IE 6.0 or above.


[Upgrade procedure]:

1. Connect the RJ-45 UTP cable to the target switch
.
2. Login is required to access the WEB interface after the switch boot completes successfully. The factory default password is "admin".

3. After Web main screen appeared, click the "Tools"\" Firmware Upgrade" at the left Menu.  

4. The screen will be direct to the "Software Upload", click the "Browse" button to select the correct firmware file.

5. Click "Upload" button to start the firmware upgrade procedure. Please don't power off the switch while procedure be started.

6. Please wait until the successful message shows in the Update Status field.

7. A message appears- "Do you want to activate new software?". Click the "Yes" button to apply the new firmware.

8. Please wait until the system reboot complete.

9. Relogin the switch via WEB browser. Please click the "System' \ "System Info" to double check if the firmware be upgraded successfully.

 

************************************************
Firmware Release History:  
************************************************

===================================
Firmware Version: 1.2b(v1.2b090511)
Hardware Version: 1
SDK Version : v2.34
Release at 2009/05/14 
===================================
This firmware provides the following modification:

A: Bug Fixed -

    (1) [IGMP Snooping]: Fixed IGMP Snooping will overwrite packet buffer of uip while it transmits specific query.

    (2) [IGMP Snooping]: Fixed IGMP Snooping will make mulitcast MAC table incosistance during it handles join-leave process.

B. Function Added -
    (1) Support SNMP Q-Bridge MIB 

    (2) Power Saving add "PERFECT_REACH" mode (No need to configure)


 
====================================
Firmware version: 1.1(v1.1b080328)
Hardware version: 1
Release at 2008/03/29 
====================================

This firmware provides the following modification:

A: Bug Fixed -
    N/A

B. Function Added -
    (1) Add Power Saving function (System/Misc Configuration)



======================================
Firmware version: 1.0(v1.0b070711)
Hardware version: 1.0
======================================
This firmware provides the following modification:

1. Initial released for hardware version 1


Sincerely yours,
PLANET Technical Support Team
Http://www.planet.com.tw


